S.P.E. TORO1000 Manuel Utilisateur page 8

MANUALE UTENTE TORO1000
TECHNICAL FEATURES
•
Universal input voltage: 100 ÷ 240Vac ; 50÷60Hz
•
Maximum input current: 13A (rms) at 110V / 6 A at 230V
•
High frequency system with advanced technology
•
Charging process fully managed by microprocessor
•
Efficiency: 91% at full load (120Vac, 48VDC)
•
Thermal protection against overheating (Derating of the charging current)
•
Environmental protection class IP65
•
Maximum relative humidity >95% (non condensing)
•
Operating room temperature: from -20 to +45°C
•
CE Conformity
•
Block relay (1A-30VAC/DC max) with NC contact for on-board installations
•
Charge curves for Pb-acid, Gel and AGM batteries
•
Remote signal (on request) of the charge status (red/yellow/green) and any faults
•
Dimensions W 280 D 230 H 105 mm
•
Centre distance for fixing: 220 x 205 mm
•
Weight: 4.6 kg
INSTALLATION
Signaling
LED
Connector RS232
COM Host port
Battery connection
cables
SPE Elettronica Industriale di Poletti Sergio
Headquarter: Via di Mezzo Ponente, 383/B
40014 Crevalcore (Bologna) Italy
92% at full load (230Vac, 48VDC)
Protective
cover
pag. 8/26
Rev n° 1 del 11/06/2024