Publicité
Les langues disponibles
Les langues disponibles
SET function
SET
Press the SET button to enter the function setting, then press SET button or TEMP
button to select the desired function. The selected symbol will flash on the display area, press the
OK button to confirm.
To cancel the selected function, just perform the same procedures as above.
Press the SET button to scroll through operation functions as follows:
For models of RG10P2(G2HS)/BGEF, RG10L5(G2HS)/BGEF
Breeze away (
)
Active clean/Self clean (
*
Follow Me(
)
AP mode (
[ ]: Model dependent
*
For model of RG10R(D2HS)/BGEF
Sleep(
)
Follow Me(
[ ]: Model dependent
*
Breeze Away function(
This feature avoids direct air flow blowing on the
body and makes you feel indulging in silky
coolness.
NOTE:
This feature is available under cool,
Fan and Dry mode only.
Active clean function(
The Active Clean Technology washes away dust,
mold, and grease that may cause odors when it
adheres to the heat exchanger by automatically
freezing and then rapidly thawing the frost.
When this function is turned on, the indoor unit
display window appears "CL", after 20 to 45
minutes, the unit will turn off automatically and
cancel CLEAN function.
*
)
*
)
AP mode (
)
) (some units) :
) (some units) :
The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
111
OK
*
)
Fresh/UV-C lamp (
FRESH/UV-C lamp function(
(some units) :
When this function is selected, the Ionizer or
UV-C lamp(model dependent) will be activated.
If has both features, these two features will be
activated at the same time. This function will
help to purify the air in the room.
Sleep function(
) :
, ,
For the detail, see sleep operation in
,
,,
USER S MANUAL.
NOTE: The SLEEP function is not available
in FAN or DRY mode.
or TEMP
)
Sleep(
)
)
,
,,
Publicité
