Publicité
GB
Warning
This symbol means that improper use of the product counter to
the information in this column may lead to death or serious injury.
■ Do not use an unstable outlet.
■ Do not wet the power plug or electrical parts.
■ Do not use any power supply other than the one specified.
■ Do no use any outlet or wiring equipment beyond its specified rating.
■ Do not damage the power cord or power plug.
Do not damage, modify, bend forcibly, twist, pull, pinch, heat or put heavy
objects on the power cord or power plug.
■ Do not modify (cut or extend) the power cord.
■ Do not connect cold and hot water pipes backwards.
■ Do not use supplied water hotter than 85℃．
■ Do not insert or pull out the power plug with wet hands.
■ Do not touch the power plug during thunderstorms.
■ Do not install the product in a humid place like a bathroom.
■ Never disassemble, repair or remodel the product.
■ Select the outlet mounting location so that condensation on the water
supply pipe and water splashed during use of the product do not contact
the outlet, or consider using a water-proof outlet.
■ When cleaning the filter, close the water shutoff valve before loosening the lid.
Also, check that the filter on the hot water side is not hot.
■ Mount the outlet in a location higher than 100 mm from the floor.
■ When pulling out the power plug, be sure to hold the plug by the body.
■ Insert the power plug all the way to the base.
This symbol means that improper use of the product counter to
the information in this column may lead to injury or property
damage.
■ Do not subject to strong force or impacts.
■ Do not install the product on moving vehicles such as wheeled vehicles or
boats.
■ Do not install the product outdoors or in a place where freezing is anticipated.
■ Remove dust and dirt that accumulate on the blades of the power plug at
a regular interval (once a month) and insert the power plug all the way to
the base.
■ Do not remodel this product by installing parts that do not belong to it or
removing parts from it.
■ Do not disassemble and remodel the parts described in this manual.
■ Check around pipes (inside the cabinet, spy window, etc.) at regular intervals
(more than twice a year) for water leakage and rattling.
■ Replace the check valve regularly for safety sake.
■ In order to prevent scalding due to improper operation, adjust the cold water
supply pressure higher than the hot water supply pressure or to the same
pressure.
■ Do not block the water spouting hole when you use the wand.
■ Do not leave abnormalities unaddressed, such as rattling parts.
■ Do not hit or operate plated parts with undue force.
■ Do not use cleaning agents other than neutral detergent.
■ If the product is not to be used for a long period of time, pull out the power
plug.
-2-
Caution
Publicité
