Atag CSX4674M Mode D'emploi page 242

USE
EN 50
8. If necessary, change the phase 2 default values (function,
temperature and cooking time) (see points 3, 4 and 5).
200
Stage cooking
9. Confirm the setting of stage 2 using the confirm key.
1
2
3
10. If desired, tap on '3' to show the stage 3 settings.
11. If necessary, change the stage 3 default values (function,
temperature and cooking time) (see points 3, 4 and 5).
12. Confirm the setting of stage 3 using the confirm key.
Delete a stage by tapping on the cross next to the settings. A stage can
only be deleted if it has not yet started.
13. By touching the confirm key again, the oven starts to work according
to stage 1 (the active stage is displayed in white).
When the set time has elapsed, the following stage will be activated,
this being stage 2 and later stage 3 if this has been set.
The selected settings can be saved in 'Favourites'. Open the 'ADD
TO FAVOURITES' menu from the 'Plus' menu (See 'Add to favourites'
chapter).
00 : 30
10 : 15
0 : 20
°C H : M
00 : 10
160 °C H : M
00 : 20
°C H : M
200
00 : 30