Atag CSX4674M Mode D'emploi page 231

USE
Functions table
Function Description
Oven functions
Hot Air
• Heating by means of hot air from the back of the
oven.
• This mode provides uniform heating and is ideal
for baking.
• Place the baking tray or oven rack in the middle of
the oven.
• Suggested temperature: 180 °C
• Preheating is recommended.
ECO Hot air
• Heating by means of hot air. ECO hot air uses less
energy but gives the same result as the hot air
setting. Cooking takes a few minutes longer.
• This mode can be used for roasting meat and
baking pastry.
• Place the baking tray or oven rack in the middle of
the oven.
• Suggested temperature: 180 °C
• This setting makes use of the residual heat (heating
is not on the whole time) to achieve low energy
consumption (in accordance with energy class
EN 60350-1). In this mode the actual temperature in
the oven is not displayed.
4. Select a temperature (see 'Function-setting display' chapter).
5. Start the fast preheat function using the confirm key.
• Fast preheat can also be linked to a cooking process. Activate
'FAST PREHEAT' from the 'Plus' menu to do so.
• When the set temperature is reached, a pop-up will appear and a
sound signal sounds.
• The cooking time starts counting up or down after door closing.
Consult the table to choose the desired function. Also consult the
instructions for preparation on the dish packaging.
2
2
EN 39