Publicité
Les langues disponibles
Les langues disponibles
accidents and burns due to flying sparks
or slag,
– harmful emissions of smoke and gases
caused by lack of air or insufficient
extraction in closed rooms.
Reduce the residual risk by carefully using
the device as intended and observing all
instruction.
z Parts description
1
Cover wire feed unit
2
Carry strap
3
Mains plug
4
Earthing cable with earth clamp
5
ON/OFF main switch
6
Mains connection control lamp
7
Control dial for adjusting the
material thickness
8
Overload protection control lamp
9
Burner nozzle
10
Torch
11
Torch button
12
Cable assembly
13
Welding nozzle (0.6 mm)
14
Welding nozzle (0.8 mm)
15
Welding nozzle (0.9 mm)
16
Welding nozzle (1.0 mm)
17
Flux cored wire spool (wire reel)
Ø 0.9 mm / 450 g
18
Chipping hammer with wire brush
19
Feed roll
20
Shield body
21
Dark welding lens
22
Handle
23
Welding protection shield after assembly
24
Mounting clip
25
Protective glass catch
26
Handle fitted
27
Setting screw
28
Thrust roller unit
29
Roller holder
30
Feed roll holder
31
Wire outlet
32
Cable assembly bracket
33
Torch neck
8
GB/IE/NI
z Technical specifications
Mains connection:
Welding current I
:
2
No-load voltage U
0
Greatest rated value
of the mains current:
Effective value of the
greatest rated current:
Welding wire reel max.:
Welding wire
diameter max.:
Fuse:
Recommended
material thickness:
Changes to technical and visual aspects of
the product may be made as part of future
developments without notice. Accordingly,
no warranty is offered for the physical
dimensions, information and specifications
in these operating instructions. The operating
instructions cannot therefore be used as the
basis for asserting a legal claim.
Safety instructions
Please read the operating instruc-
tions with care and observe the
notes described. Familiarise your-
self with the device, its proper
use and the safety instructions
based on these operating instruc-
tions. The rating plate contains
all technical data of this welder;
please learn about the technical
features of this device.
Repairs and/or maintenance
„
230 V~ /
50 Hz
(alternating
current)
20–120 A
:
22 V
I
17.3 A
1 max.
I
11.3 A
1eff
approx. 1000 g
1.0 mm
16 A
0.8–3.0 mm
Publicité
