Télécharger Imprimer la page

Parkside PIFDS 120 B2 Consignes D'utilisation Et De Sécurité page 21

Poste à souder inverter à fil fourré
Masquer les pouces Voir aussi pour PIFDS 120 B2:

Publicité

Les langues disponibles

Les langues disponibles

length and a slight fillet (Fig. W, X).
Welds on an inner edge
The preparation for this weld joint is very
simple and is carried out for thicknesses of
5 mm. The dimension "d" needs to be
reduced to a minimum and should always be
less than 2 mm (Fig. W).
W
However, it is no longer expedient for thicker
materials. In this case, it is better to prepare
a joint as shown in Figure V, in which the
edge of the plate is angled.
X
Overlap welds
The most common preparation is that with
the straight weld edges. The weld can be
released using a standard angle weld seam.
Both workpieces must be brought as close to
each other as possible, as shown in Fig. Y.
Y
z Maintenance
Remove dust and contamination from
the device regularly.
Clean the device and accessories
with a fine brush or a dry cloth.
z Information about recycling
and disposal
DO NOT DISPOSE OF ELECTRICAL
TOOLS IN HOUSEHOLD WASTE!
DON'T THROW AWAY – RECYCLE!
According to European Directive 2012/19/EU,
used electrical devices must be collected sepa-
rately for environmentally compatible recycling or
recovery. The symbol of the crossed out dustbin
means that this device must not be disposed of in
household waste at the end of its service life. The
device must be handed in at established collection
points, recycling centres or waste management
depots. The disposal of defective devices which
you have sent in will be carried out free of charge.
In addition, distributors of electrical and electronic
equipment as well as food distributors are obliged
to accept returned waste. Lidl provides you with
return options directly in its branches and shops.
Return and disposal is free of charge for you.
When buying a new device you have the right
to return an equivalent old device at no charge.
In addition you have the option, regardless of
whether you are buying a new device, to hand
in (up to three) old devices at no charge, as long
as the device is no larger than 25 cm in any
dimension. Before returning the device please
delete all personal information. Before returning,
please remove batteries or rechargeable battery
packs which are not enclosed by the old device,
as well as bulbs, which can be removed without
destroying the product and take these to a
separate collection point.
Batteries containing harmful
substances are labelled with the
adjacent symbol, which indicates
the prohibition on disposal in household waste.
GB/IE/NI
21

Publicité

loading

Ce manuel est également adapté pour:

2634