Télécharger Imprimer la page

PYD Electrobombas SP Serie Instructions D'utilisation Et Maintenance page 36

Publicité

Les langues disponibles

Les langues disponibles

OPERATING AND MAINTENANCE MANUAL
SOLAR PUMPING GRUOP
IMPORTANT WARNINGS:
It is absolutely necessary that the open circuit voltage (VOC) of the solar installation NOT exceed
the open circuit voltage established for the solar panel. If so, the controller components will be
damaged.
In the event of an electrical storm, please disconnect the cable between the solar installation and
the panel to avoid lightning damage to the controller.
Please keep the controller out of reach of children to avoid unnecessary damage.
DO NOT tamper with the controller chip or allow anyone without professional training to do so.
The solar pumping system can only be used for pumping clean water such as water for irrigation
or domestic consumption, and in no case can it be used for water containing sand or corrosive
water.
Surface pumps must be protected from rain to prevent water damage to the motor.
The maximum immersion depth of the submersible pump is 30 m.
The solar panel supplied with the pump is designed to work with our pumps and should not be
used for other products or for any other use. We are not responsible for any damage caused by
improper use.
NOTES FOR MAINTENANCE
The power supply to the controller must be disconnected before any maintenance operation.
Do not put metal parts or objects inside the solar panel to avoid short circuit on the controller
board.
Keep the solar panel closed, and keep it clean during and after any maintenance operation, avoi-
ding dust or water.
www.proindecsa.com / proindecsa@proindecsa.com
36

Publicité

loading

Ce manuel est également adapté pour:

Th serieSt serie