emerio CBC-122043.2 Mode D'emploi page 11

Wi-Fi CONNECTION GUIDE (This guide for the APP may not be up to date due to software version upgrade or
other reasons. This instruction is used as a guide only. Below mobile phone interface uses English version in
iOS as an example.):
1. Search "Smart Life" in App Store (for iOS) or Google play (for Android) to download the application.
2. Sign up or log in to your account on the APP. Tap the "+" at top right corner or button "Add Device" to add
your device. (Fig.1) Notice: when the Bluetooth of your phone is on, the device will be detected
automatically as Fig.8; tap "Add". Enter the Wi-Fi information in Fig.9 and then tap "Next". Wait until you
get Fig.10 and then tap "Done". Now you can operate your device in the control interface. Tap buttons to
set your appliance. Alternatively, continue to follow below steps to manually add the device.
3. Find "Small Home Appliances" and tap the icon "Heater (Wi-Fi)". (Fig.2)
You will get the prompt that asks you to use 2.4 GHz Wi-Fi network and enter password. (Fig.3) Tap "Next"
to get Fig.4.
Note: When setting up Wi-Fi function you need to select an available 2.4 GHz network and connect the
appliance. Your mobile needs to be connected to the same network in order to set up Smart Life in the
phone. When this is done you can access the appliance from your phone on any network.
There are two ways to do the net pairing. It is recommended to use way 1; if failed please use way 2.
Way 1:
1) Plug the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the power
switch to position "I". The Wi-Fi indicator light on the digital display starts flashing quickly.
2) Tap "Confirm the indicator is blinking" in Fig.4. You will get Fig.5 that asks you to select the status of
the indicator light. Tap "Blink Quickly".
3) Wait until you get Fig.7 and then tap "Done".
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Way 2:
1) Long press the button "M" on the control panel for approx. 3 seconds until the Wi-Fi indicator light
flashes slowly.
2) Tap "Confirm the indicator is blinking" in Fig.4. You will get Fig.5 that asks you to select the status of
the indicator light. Tap "Blink Slowly".
Continue to tap "Go to Connect" in Fig.6 to connect your mobile phone to the device's hotspot
"SmartLife-XXXX". After the hotspot has been connected, go back to the App.
3) Wait until you get Fig.7 and then tap "Done".
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Note: after Wi-Fi connection, the weekly timer function by remote control will be invalid.
- 10 -