Dreame H12 Pro Ultra Manuel D'utilisation page 9

Care & Maintenance
EN
Cleaning the Brush Assembly
1. First, press the brush roller cover
release buttons inwards on both sides
to remove the brush roller cover. Press
the brush roller release button, and the
brush roller handle will pop out. Pull it to
take out the brush roller.
1
2
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
Note:
• Clean as needed. Alternating use of the two provided brush rollers is recommended.
• Replacing the brush roller every 3 to 6 months is recommended.
13 13
2. Clear any hair and debris caught on the
brush roller with the provided cleaning
brush. Rinse the brush roller with clean
water and dry it completely.
1
2
4. Re-install the brush roller and the
brush roller cover until you hear a click.
Care & Maintenance
Cleaning the Tube and the Dirt Sensor
Remove the Used Water Tank, gently wipe the tube and the dirt sensor with a wet cloth
before use.
Dirt Sensor
Note: Do not rinse the tube or the dirt sensor.
EN
14 14