Publicité
Les langues disponibles
Les langues disponibles
SilverCrest STH 900 A1
the mains cable is damaged, it must be replaced by the
manufacturer, its customer service or a similarly qualified
person, in order to avoid any possible danger.
WARNING! Never place the toaster, furniture or other
heavy objects on the power cable and make sure it does not
get kinked.
WARNING! Never tie knots in the power cable and do
not tie it to other cables. The power cable should be laid so
that nobody can trip over it or be obstructed by it.
5. Copyright
All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up-to-date as of the date of printing. Subject to change without notice.
6. Before you start
Remove the toaster from the packaging. Remove all packaging material and check that all parts
are complete and undamaged. If you find anything missing or damaged, please contact the
manufacturer.
7. Getting started
DANGER! Place the toaster on a level and heat-resistant
surface. Place a heat-resistant board in between the surface
and the toaster if the surface itself is critical.
26 - English
Publicité
