Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CONNECTION
Notice: Two speakers must be same model and both compatible with TWS.
1. Please switch on both speakers and select "Bluetooth" mode;
2. Press "TWS" button (7) of one of the speakers until hearing a "beep". It becomes the main speaker (left chennel), which
will automatically search and connect with another speaker (right channel).After connection, you will hear a "beep";
3. Connect mobile phone or Bluetooth player to the speaker by Bluetooth.After connection, you can play music with the
TWS Stereo- Speaker System.
TWS function operates inTWS mode, manipulations to the main speaker will be simultaneously effected in another speaker.
For example, volume adjustement, previous and next song selection, play and pause, power on and off.
Note:
-
If the 2 loudspeakers are not paired, switch off both devices and repeat steps 1, 2 and 3.
-
The TWS function only works between equal speakers or with other speakers that use the same micro processor or solution.
USB/ MICRO SD INPUT
1. Switch On the appliance;
2. Insert a USB memory or an Micro SD card in the corresponding entries (21/20). Playback starts automatically;
3. To pause playback, press the
show "PAUS";
4. To resume playback, press the
:
5. Press
(8) button on unit or
9
Press the
(6) button on unit or
6. Using the numeric keypad (14) on remote control you can directly enter the number of the song you want to play;
7. Press
button (8) on remote control, the display will show "ONE" (to reproduce the same track continuously);
press it a second time, the word "ALL" will appear on the display (to continuously play all the tracks contained in the
USB/Micro SD device);
8. Use the FL- (2) and FL + (7) buttons on the remote control to select the folder (if any) containing the desired tracks.
Note:
-
The player may not support some USB/Micro SD devices, this is due to the incompatibility of some processors.
-
To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
-
From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Switch on the unit and select the "AUX" function;
2. Connect any unit equipped with audio output, through a cable 3.5mm jack to the AUX IN (22);
3. Use the external device from their commands.
FM RADIO
Press
button (7) to search FM channels automatically.
This operation will scan all FM stations and Pre-record them to memory.
The scan procedure will take several minutes and cannot be interrupted.
:
Once completed, press
(7) button on the unit or the key
(7) on the unit or on the remote control (11);
:
(12) button on remote control while listening to switch to the next track.
9
(4) button on remote to go to the previous tracks;
9
button (8) or
button (6) to be previous stored radio or next stored radio.
(11) on remote control, the display will
15
XF 1600 KB
Publicité
