Important Information - Beurer BM 77 Mode D'emploi

This blood pressure monitor also has a haemodynamic stability
display, which is referred to as a resting indicator throughout
these instructions for use. This shows whether you, and con-
sequently your circulatory system, are sufficiently at rest when
the blood pressure measurement is being taken and is there-
fore a more precise indicator of your resting blood pressure.
Read more about this in chapter 6.

2. Important information

Signs and symbols
The following symbols are used in these instructions for use,
on the packaging and on the type plate for the device and ac-
cessories:
Caution
Note
Note on important information
Follow instructions for use
Type BF applied part
Direct current
Disposal in accordance with EC Direc-
tive WEEE (Waste Electrical and Electronic
Equipment)
Dispose of packaging in an environmentally
21
friendly manner
PAP
Manufacturer
Storage/Transport
Permissible storage and transport tempera-
ture and humidity
Operating Permissible operating temperature and hu-
midity
Protected against foreign objects equal to
IP 21
or greater than 12.5 mm in diameter and
against vertically falling drops of water
Serial number
SN
The CE labelling certifies that the product
complies with the essential requirements of
Directive 93/42/EEC on medical products.
Certification symbol for products that are
exported to the Russian Federation and
members of the CIS
Advice on use
• In order to ensure comparable values, always measure your
blood pressure at the same time of day.
• Before every measurement, relax for about five minutes.
• If you want to perform several measurements on the same
person, wait five minutes between each measurement.
22