electrical equipment – Part 2 – 30: Particular requirements
for the safety and essential performance of automated non-
invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been care-
fully checked and developed with regard to a long useful
life. If using the device for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.
• We hereby guarantee that this product complies with the
European RED Directive 2014/53/EU. Please contact kd@
beurer.de to obtain detailed information, such as the CE
Declaration of Conformity.
12. Mains part
Model no.
LXCP12-006060BEH
Input
100 – 240 V, 50 – 60 Hz, 0.5 A max
Output
6 V DC, 600 mA, only in connection with
beurer blood pressure monitor.
Supplier
Shenzhen Iongxc power supply co., ltd
Protection
This device is double insulated and pro-
tected against short circuit and overload by
a primary thermal fuse.
Make sure to take the batteries out of the
compartment before using the mains part.
Polarity of the the DC voltage
connection
Double insulated / equipment class 2
Enclosures and
Equipment enclosed to protect against
Protective Covers
contact with live parts, and with parts
which can become live (finger, pin, hook
test).
The operator shall not contact the patient
and the output plug of AC mains part simul-
taneously.
13. Replacement parts and wearing parts
Replacement parts and wearing parts are available from the
corresponding listed service address under the stated material
number.
Designation
Universal cuff (24-40 cm)
Mains part (EU)
USB cable
14. Warranty / service
In case of a claim under the warranty please contact your local
dealer or the local representation which is mentioned in the list
"service international".
In case of returning the unit please add a copy of your receipt
and a short report of the defect.
37
Item number and/or
order number
163.764
071.95
162.928