UNITED OFFICE 96272 Mode D'emploi page 24

Clearing a material blockage:
• Move the switch to the "REV" ("reverse")
u
position if the material being shredded causes
a blockage.
The appliance now goes into reverse and the
material that is being shredded is ejected.
• Move the switch
u to the "OFF" position as
soon as the jammed material has been ejected.
Switching the appliance off:
• Switch the appliance off by moving the switch
to the "OFF" position.
Emptying the waste containers
• Empty the waste containers
• Empty the large waste container
when paper is visible in the viewing window
• Dispose of the waste material in an environmen-
tally responsible manner.
Emptying the large waste container
Caution:
Remove the power plug from the wall socket to avoid
unintentional starting of the appliance
• Remove the cutter attachment
waste container .
r
• Pull the small waste container
the large waste container
• Empty the large waste container
assemble the components.
All manuals and user guides at all-guides.com
u
/ regularly.
w r
r at the latest
e .
from the large
q
w upwards out of
r on the guide rails.
and then re-
r
- 21 -
Emptying the small waste container
• Remove the cutter attachment
waste container .
r
• Pull the small waste container
the large waste container
so that you can empty it.
• Empty the small waste container
reassemble the components.
Cleaning
Danger!
Always remove the power plug before cleaning the
appliance. There is a risk of receiving an electric
shock!
Warning!
The cutters in the appliance are very sharp! Injury
hazard!
Attention:
Do not spray any oil or other lubricants into the cut-
ter openings t / y . These would irreparably dama-
ge the appliance!
• Remove any residue left in the cutting openings
/ or cutting blades with a suitable tool,
t y
e.g. a pair of tweezers. Ensure that the plug has
been disconnected.
• Clean the appliance with a lightly moistened
cloth. For stubborn soiling use a mild detergent
on the cloth.
from the large
q
upwards out of
w
r on the guide rails
w and then