Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
nO
2-
appears. Press
3- Press the key
for 5 seconds.
The device returns to its initial configuration and
goes back automatically to the Auto mode.
General
Comfort temperature setpoint
Duration of Boost
Keypad lock
User settings
Backlight
Eco reduction level
Frost protection
Comfort low temperature limit
Comfort high temperature limit
Max. Boost duration
Max. Boost temperature
Temperature unit
Installer settings
Open window detection
Optimization function
PIN code protection
PIN code value
Advanced installer settings
Temperature sensor calibration
Radiatorpower
To exit the settings, press
ERROR CODES ON DISPLAY
- Er1: Room temperature sensor defective (interrupted sensor)
- Er2: Room temperature sensor defective (sensor shorted)
- ErE: Error in electronics
YES
or
to select
.
19 °C
60 min.
Deactivated
L3
-3,5 °C
7 °C
7 °C
30 °C
60 min.
35 °C
°C
Activated
Option Comfort
Deactvated
0000
0,0
500W
3 times.
5 sec.
BASIC
RF
EN
no
YES
5 sec.
21
Publicité
Table des Matières
