Backlight; Frost Protection - Vasco BASIC Manuel D'utilisation Et D'installation

ACCESS
From Auto, Comfort, Eco or Frost protection mode:
Information display
Long press 5
1
seconds
Setting sequence diagram:

Backlight

Eco reduction level
Max. Boost duration
BACKLIGHT
1- Three options are available:
L1
= timed backlight: the screen is illuminated when a button is
pressed.
L2
= permanent backlight: the screen remains illuminated
all the time.
L3
= idem as option L1
Option L3 is set by default.
Press the or button as appropriate.
2- To confirm and go on to the next setting, press
To confirm and exit the settings, press 2x
ECO REDUCTION LEVEL
The reduction is pre-set to -3.5°C compared to the Comfort setpoint temperature. You can vary it between -1°C and
8°C in increments of 0.5°C.
Note: regardless of the reduction level set, the Eco setpoint temperature will never exceed 19°C.
1- Press or to display the required value.
2- To confirm and go on to the next setting, press
To confirm and exit the settings, press 2x

FROST PROTECTION

Your device is pre-set to 7°C, you can vary the
value of the Frost protection setpoint from 5°C
to 15°C in increments of 0.5°C.
1- Press
or to display the required value.
2- To confirm and go on to the next setting, press
To confirm and exit the settings, press 2x
2 short
presses
Frost protection
Max. Boost Temperature
.
.
.
.
.
Information display
1
upper and lower comfort temperature limit
Temperature unit
.
User
= user settings
short press
Restoring factory settings
c
O
3 . 5 3 . 5
c
O
6 . 0 6 . 0
EN
13