Vasco BASIC Manuel D'utilisation Et D'installation page 73

TEMPORARILY OVERWRITE THE WEEK PROGRAM
This function allows you to change the setting temperature temporarily until thenext scheduled change in temperature or
the transition to 0:00.
Example:
1- The controller is in Auto mode, the running
programme is Eco 15,5°C.
2- By pressing or , you can change
temporarily the desired temperature up to 18°C
for example.
3- This change will be automatically cancelled
at the next change of programme or transition
to 0:00.
BOOST
Important: the Boost mode can be enabled at any time, whatever the current operating mode (Auto, Comfort,
Eco or Frost protection).
First press = Boost.
During the first minute, you can modify the Boost
duration from 0 to the maximal Boost duration, by
pressing and .
This modification will be saved and effective for the
next Boost.
Comment: After 1 minute, you can modify temporarily the duration: it will be valid only for this active Boost and
therefore non-recurring.
The boost stops if the ambient temperature reaches the maximal Boost temperature:
The controller switches off but the Boost mode is always
active : the count is always displayed, the Boost symbol
and the heating indicator flash on the display.
When the temperature drops under the maximal Boost
temperature, the Boost will be restarted until the count
ends.
Second press = Boost cancellation.
The cursor moves above the previous active mode and the setting temperature appears.
The radiator is now ready for use. For advanced settings: see installer settings
3
3 3
3
EN
11