Vasco BASIC Manuel D'utilisation Et D'installation page 79

PIN LOCK CODE
Overview
You can set the 4-digit pin code yourself which, when activated, makes the following functions unavailable:
- Selecting the Comfort mode: only the Auto, Eco and Frost protection modes are available.
- Setting the Comfort and Eco and Frost protection temperature.
- Changing the week program.
- Setting the open window detection.
When using "PIN code locking" protection for the first time, you must take the following 3 important steps:
1- Initialise the PIN code, enter the default PIN code (0000) to access the function.
2- Activate the PIN code to lock the settings that will be protected by the PIN code.
3- Customise the PIN code; replace (0000) by your personal four digit code.
Initialising the default PIN code = '0000'
By default, the PIN code is not activated =
1- The PIN code stored by default is 0000.
Using or select the digit 0. It flashes,
confirm by pressing
2- For the remaining digits, select the digit 0 by
pressing .
When 0000 is displayed, press
confirm.
The PIN code is initialised, the controller automatically suggests the following setting: activation of the PIN code.
Activating/Deactivating the PIN code
OFF
1- appears in the display.
Press or
to activate the PIN code.
On
= PIN code activated
OFF
= PIN code deactivated
2- Press to confirm and go on to the next setting.
The PIN code is now activated.
No changes to the settings listed in "Overview" are
possible.
Customising the PIN code
On
1- When is displayed, press
seconds.
OFF
.
again to
for at least 5
O---
1 2
➊
OO--
OO--
OO--
On On
5 sec.
EN
➋
OFF
On
5 sec.
17