Temperature Unit; Restoring Factory Settings; User Settings - Vasco BASIC Manuel D'utilisation Et D'installation

TEMPERATURE UNIT

The default temperature unit is degrees Celsius.
1- Press or to change the temperature unit.
2- To confirm and go on to the next setting automatically,
press .
To confirm and exit the settings, press 2x

RESTORING FACTORY SETTINGS

rest
1- is displayed for 1 second.
nO
2- flashes. Press or
3- Press
for 5 seconds.
The device returns to its original configuration
and automatically goes back to Auto mode.
General
Comfort temperature setpoint
Duration of Boost
Keypad lock

User settings

Backlight
Eco reduction level
Frost protection
Comfort low temperature limit
Comfort high temperature limit
Max. Boost duration
Max. Boost temperature
Temperature unit
Press 2x to confirm and exit the settings.
.
Yes
to select .
19 °C
60 min.
Deactivated
L3
-3,5 °C
7 °C
7 °C
30 °C
60 min.
35 °C
°C
5 sec.
5 sec.
BASIC
EN
rESt
no
YES
5 sec.
15