Télécharger Imprimer la page

Parkside PRTA 20-Li D3 Mode D'emploi page 15

Publicité

Les langues disponibles

Les langues disponibles

Read the user manual carefully . Be familiar
 
with the controls and the correct use of the
product .
The product must not be used at altitudes
 
higher than 2000 m .
Children and persons with limited
 
physical, sensory or mental capabilities or
inadequate experience and knowledge,
or persons who are not familiar with the
instructions, should never be allowed to use
the product! Local regulations may specify
an age limit for the user .
Never let children or persons who are not
 
familiar with the instructions mentioned use
the product .
Preparation
Before each use, carry out a visual
 
inspection on missing or wrongly mounted
protective devices or parts of the cutting
device .
Before commissioning and after any
 
impacts, check for signs of wear and
damages, and have any necessary repairs
performed .
Operation
m
WARNING!
Do not touch any moving dangerous
u
parts before the battery has been
removed and the moving dangerous
parts have come to a complete stop .
Wear safety goggles, stable shoes and
 
long trousers over the entire period of use
of the product .
The use of the product under bad weather
 
conditions, especially in case of lightning
risk, must be avoided .
Caution, risk of injury from cuts on hands
 
and feet .
Stop using the product when persons,
 
above all children, and house pets are in
the vicinity .
Use the machine only in daylight or with
 
good artificial lighting .
Always keep your hands and feet away
 
from the cutting equipment, above all when
you switch the motor on .
Never install metallic cutting elements .
 
Never use the product with damaged or
 
missing protective equipment .
Avoid an abnormal body posture . Ensure
 
secure footing at all times to maintain
balance when working on slopes .
Go slowly . Do not walk with the product in
 
your hand .
Always wear sturdy shoes and long trousers
 
during operation of the product .
In the case of an accident or malfunction
 
during operation, the product must be
switched off immediately . Injuries must be
properly treated or medical assistance
sought . Read the "Troubleshooting" section
to correct any malfunctions or contact our
Service Centre .
Do not use any accessories that are not
 
recommended by Parkside . This can result in
electric shock or fire .
Always disconnect the product from the
 
power supply (i .e . removable battery)
whenever the product is left unattended;
before clearing a blockage;
before checking, cleaning or working on
the product;
after striking a foreign object;
whenever the product starts vibrating
abnormally .
Always ensure that the ventilation openings
 
are kept free of foreign objects .
Maintenance and storage
Remove the removable battery before
 
carrying out maintenance or cleaning work .
Use only spare parts and accessories
 
supplied and recommended by the
manufacturer .
The product must be checked regularly and
 
maintained . Have the product repaired in a
licensed workshop .
When not in use, store the product out of
 
the reach of children .
GB/IE/NI
13

Publicité

loading