Sony XR-7600 Mode D'emploi page 8

| olor=h dlolamr-lale im alinieldlolamme) an @relalecelts)
Notes on the Power Select Switch —__
You can choose illumination mode by changing the power
select switch located on the bottom. *
Reset button
ayn"
Use a ball-point pen or a similar object.
When you set the ignition key to the accessory position
Power select ewich [ON
TAPE, FM/AM, CD, &
buttons and the cassette
insertion door
illuminate where? No illumination
¢ When you activate the unit, all parts of the panel illuminate,
regardless of the position of the switch.
© If your car has no accessory position, we recommend you to
set the switch to the OFF position.
© Be sure to press the reset button after changing the position
of the switch.