ico) Ule) (-X-alole)
diate meiel(e(=
Ths following check will assist in the correction of most
preblems which you may encounter with your unit.
Before going through the check list below, first refer back to
the connection and operating procedures.
Radio reception
Cause/Solution
© Memorize the correct frequency.
© The broadcast is weak. > Use manual
tuning.
The broadcast is weak. * Use manual
tuning.
© Tune in precisely.
¢ The broadcast is weak. = Press SENS.
Contamination of the tape head. = Ciean
the head.
© There is a noise in the space between
selections.
¢ A blank space is too short (less than 4
seconds).
¢ FF is pressed immediately before the
following selection.
© REW is pressed immediately after the
selection starts.
¢ A long pause, or a passage of low
frequencies or very low sound level is treated
as a blank.
Preset tuning is not possible.
Automatic tuning is not possible.
The STEREO indicator flickers.
Tape playback
Playback sound is distorted.
The AMS does not operate correctly.