Sony XR-7600 Mode D'emploi page 28

Orolele){-t1eleren diate mereilel=
No sound The unit is in the pause mode.
Playback sound is skipped. Dusty or defective disc.
=|
mf 2
General
No sound ¢ Control the volume with the @ @. i
© Set the fader control to the center position on |
the 2-speaker system.
About the error displays (when the optional Sony CD
changer is connected}
The following indicator flickers for about five seconds and
alarm sound is heard.
| Case | Sotto
The disc magazine is not inserted in the | Insert the disc magazine with discs into
CD changer. the CD changer.
No disc is inserted in the disc magazine. | Take out the magazine and insert the
discs.
| The disc is dirty. Clean the disc.
The disc is inserted upside down. Insert the disc correctly.
The CD changer cannot be operated Press the reset button of the XR-7600.
because of some trouble.
The temperature of the CD changer is Wait till the unit cools off.
too high and the protection circuit has
been activated.
28