Publicité
• Do not use equipment if the switch does
not turn it ON and OFF. Any tool that can-
not be controlled with the switch is dan-
gerous and must be repaired.
• Disconnect the batteries from the e quip -
ment before making any adjustments,
changing accessories, or storing. Such
preventive safety measures reduce the risk
of injury.
• Store idle equipment out of the reach of
children and do not allow persons unfa-
miliar with the equipment or these in-
structions to operate the equipment.
Equipment can be dangerous in the hands
of untrained users.
• Maintain equipment. Check for missing
parts, breakage of parts and any other
condition that may affect the equipment's
operation. If damaged, have the equip-
ment repaired before use. Many accidents
are caused by poorly maintained equip-
ment.
• Use the equipment and accessories in
accordance with these instructions,
taking into account the working condi-
tions and the work to be performed.
Use of the equipment for operations differ-
ent from those intended could result in a
hazardous situation.
• Use only accessories that are recom-
mended by the manufacturer for your
equipment. Accessories that may be suit-
able for one piece of equipment may be-
come hazardous when used with other
equipment.
• Keep handles dry and clean; free from
oil and grease. Allows for better control of
the equipment.
Battery Use & Care
• Recharge only with the charger speci-
fied by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with an-
other battery pack.
• Use equipment only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
• When a battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws or
other small metal objects that can make
a connection from one terminal to an-
999-995-164.09_Rev. A
micro CA-350x Inspection Camera
other. Shorting the battery terminals to-
gether may cause burns or a fire.
• Under abusive conditions, liquid may
be ejected from the battery; avoid con-
tact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Service
• Have your equipment serviced by a
qual i fied repair person using on ly iden-
tical replacement parts. This will ensure
that the safety of the tool is maintained.
Specific Safety
Information
WARNING
This section contains important safety in-
formation that is specific to the inspec-
tion camera.
Read these precautions carefully before
using the RIDGID
®
tion Cam era to reduce the risk of electri-
cal shock or other serious injury.
SAVE THESE INSTRUCTIONS!
A manual holder is supplied in the carrying
case of the micro CA-350x Inspection
Camera to keep this manual with the tool
for use by the operator.
micro CA-350x Inspection
Camera Safety
• Do not expose the display unit to water
or rain. This increases the risk of electri-
cal shock. The micro CA-350x imager
head and ca ble are waterproof to 10' (3 m).
The hand-held display unit is not.
• Do not place the micro CA-350x Inspec -
tion Cam era anywhere that may con-
tain a live electrical charge. This in-
creases the risk of electrical shock.
• Do not place the micro CA-350x Inspec -
tion Cam era anywhere that may con-
tain moving parts. This increases the risk
of entanglement injuries.
• Do not use this device for personal in-
spection or medical use in any way.
This is not a medical device. This could
cause personal injury.
• Always use appropriate personal pro-
micro CA-350x In spec -
3
Publicité
