Additional Warnings; Overview; Special Product Features; Initial Operation - Metabo SB 710 Mode D'emploi

force which can arise, always hold the machine
with both hands using the handles provided, stand
securely and concentrate.
The Metabo S-automatic safety clutch must not be
used for torque control.
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break, or a high reverse torque may build up on the
handle.

Additional Warnings:

Some dust created by
WARNING
power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to
cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from
chemicallytreated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLS ON THE TOOL:
.......Class II Construction
V...........volts
A...........amperes
Hz.........hertz
W..........watts
BPM .....beat per minute
~
..........alternating current
n .........rated speed
0
rpm.......revolutions per minute
.../min...revolutions per minute

4 Overview

See page 3.
1 Thumbwheel for gear selection
2 Additional handle / Additional handle with
vibration damping *
3 Depth stop
4 Geared chuck*
5 Futuro Plus keyless chuck *
6 Futuro Top keyless chuck*
7 Slide switch (drilling/impact drilling)
California Prop 65 08_2018
8 Speed preselection setting wheel*
9 Setting wheel for setting torque control and
impulse function *
10 Electronic signal indicator*
11 Rotation selector switch *
12 Locking button for continuous activation
13 Trigger switch
* depending on equipment

5 Special Product Features

Metabo S-automatic safety clutch:
If the tool jams or catches, the power supply to the
motor is restricted. Due to the strong force which
can arise, always hold the machine with both
hands using the handles provided, stand securely
and concentrate.
Auto-stop carbon brushes:
If the carbon brushes are completely worn, the
machine switches off automatically. SBE 1100
Plus: An LED lights up before the carbon brushes
wear out completely.
Restart protection:
(SBE 1100 Plus, SBE 1000)
Restart protection prevents the unintentional start-
up of the machine when it is reconnected to the
mains or when power returns following a power
failure.
Overload protection display:
(SBE 1100 Plus)
The overload protection display indicates if the
machine is overloaded.
Metabo impulse function:
(SBE 900 Impuls)
For effortless driving and removal of stubborn
screws, even with damaged heads. For spotlessly
clean drilling without a centre punch - in tiles,
aluminium or other materials.
Electronic torque control:
(SBE 900 Impuls)
When driving small screws and when thread
tapping with taps of small diameter, the torque
may be reduced to a value appropriate to the work
being carried out.

6 Initial Operation

Before plugging in, check that the rated
mains voltage and mains frequency, as
stated on the rating label, match with your power
supply.
To ensure that the drill chuck is securely
fitted: After initial drilling (clockwise), use a
screwdriver to firmly tighten the safety screw
inside the drill chuck (if applicable / model-
ENGLISH
ENG
7