Dometic NDS POWER & CONTROL TEMPRA TLB100 Instructions De Montage Et De Service page 11

Once switched on, the battery will be visible with the name 'TLB100xxxxx' ('xxxxx' representing the serial number
of the battery) in the Bluetooth menu of the Dometic Energy app.
9 Battery configuration
Selecting the desired BUS
The battery supports both the native N-BUS protocol and the CI-BUS protocol that is shared with other manufactur-
ers.
N-BUS setup (default)
To select the N-BUS deactivate the DIP switch 1 (A).
To select the CI-BUS activate the DIP switch 1 (B).
NOTE
• When CI-BUS protocol is active the N-BUS will not be detected.
• CI-BUS is suitable for up to 3 batteries connected in parallel. For configurations with more than 3
batteries connected in parallel, use N-BUS.
Setting the battery as MASTER or SLAVE
N-BUS setup
Battery set as Master (default).
Download the NDS | DOMETIC app.
CI-BUS setup
CI-BUS setup
Battery set as Master.
EN
11