Bosch GBH 187-LI Professional Notice Originale page 19

Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Do not direct the power tool at nearby persons during
u
operation. The application tool may fly out and cause ser-
ious injuries.
Always wear a safety helmet and safety glasses/face
u
protection. Normal glasses and sunglasses are not safety
glasses.
Check that the application tool is seated securely and
u
safely before operation.
Always make sure that you maintain a safe distance.
u
When operating the power tool in high up areas, e.g.
on a ladder, ensure that no one is beneath you.
Do not open or close the drill chuck by switching on
u
the power tool. The drill can be ejected. This poses a risk
of injury.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
WARNING
Ensure that the coin cell is kept out
of the reach of children. Coin cells
are dangerous.
Coin cells must never be swallowed or inserted into
u
any other part of the body. If you suspect that
someone has swallowed a coin cell or that a coin cell
has entered the body in another way, seek medical at-
tention immediately. Swallowing coin cells can result in
severe internal burns and death within 2 hours.
Caution! When using the power tool with Bluetooth®, a
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth® in the vicinity
of medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
Bluetooth® in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. Any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Bosch Power Tools
Symbols and their meaning
Tool data logging is enabled in this tool.
Wireless connectivity tool with built-in
®
Bluetooth technology
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
®
With the Bluetooth Low Energy Module inserted, power tool
data and settings can be transferred between the power tool
and a mobile device by means of Bluetooth
logy.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) One Chuck drill chuck
One Chuck tool holder
(2)
(3) Dust protection cap
(4) Front sleeve
(5) Rear sleeve
(6) Button for depth stop adjustment
(7) Release button for impact/mode selector switch
(8) Impact/mode selector switch
(9) Rotational direction switch
(10) On/off switch
(11) Handle (insulated gripping surface)
a)
(12) Rechargeable battery
(13) Worklight
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) User interface
English | 19
®
wireless techno-
1 609 92A 9ES | (28.06.2024)