Bosch eBike ABS BAS3311 Notice D'utilisation D'origine page 13

Cycling with an empty eBike battery
If the eBike battery's state of charge falls below a de-
fined threshold, the system will disable drive assis-
tance first. The eBike (including display and/or oper-
ating unit, light and ABS) will nevertheless remain en-
abled until the eBike battery's reserve has been used
up too. The eBike – and therefore the ABS – will not
switch off until the eBike battery is almost completely
drained.
The indicator light will come on again for approxi-
mately five seconds before the system switches off
completely.
From this point onwards, the ABS indicator light will
remain off despite ABS control being unavailable. If
the eBike is not fitted with a battery or the eBike bat-
tery is drained, ABS is disabled.
The brake system will continue working, simply with-
out the control provided by the ABS.
You will need to charge the eBike battery before you
can re-enable your eBike and the ABS function.
WARNING – ABS will be disabled without a
u
power supply!
If the power fails, the battery is drained or the
eBike battery is not fitted, the ABS will be disabled
and the ABS indicator light will not come on.
Bosch eBike Systems
English – 11
0 275 U08 3AS | (24.03.2023)