Publicité
Steps
1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
2. Slide and lift the solid-state drive off the system board.
NOTE:
Repeat the above procedure for removing the other solid-state drive.
Installing the M.2 2280 PCIe solid-state drive
Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following images indicate the location of the solid-state drive (Slots 1,2 and 3) and provides a visual representation of the
installation procedure.
Retrait et installation de composants
25
Publicité
