Publicité
Les langues disponibles
Les langues disponibles
9175399
ELECTRICAL SAFETY
1.
Disconnect device from power source before cleaning, servicing, changing
parts/accessories or when not in use.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose device to rain or wet conditions. Water entering a device will
increase the risk of electric shock.
4.
Do not alter any parts of the device or accessories. All parts and
accessories are designed with built-in safety features that may be
compromised if altered.
5.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
6.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
UNPACKING
WARNING! Do not operate the device if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
CAUTION! Use correct material handling equipment to avoid injury. Use
caution when removing the motor from its packaging. Sharp corners may
exist on motor shaft, motor key, sheet metal and other surfaces.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
•
Electric Motor
6
1/4 HP Furnace Electric Motor
For technical questions call 1-800-665-8685
V4.0
Publicité
