Publicité
Les langues disponibles
Les langues disponibles
9175399
3.
Store unused devices properly in a safe and dry location to prevent rust or
damage. Lock devices away and keep out of the reach of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Do not wear gloves when operating a device that can snag the
material and pull the hand into the device.
3.
Wear protective clothing designed for the work environment and device.
4.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
PERSONAL PRECAUTIONS
Control the device, personal movement and the work environment to avoid
personal injury or damage to device.
1.
Do not operate any device when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a device. Keep long hair covered or bound.
3.
Do not overreach when operating a device. Proper footing and balance
enable better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
DANGER! Only qualified personnel, trained in the safe installation and
operation of this equipment, should install this motor. When improperly
installed or used, rotating equipment can cause serious or fatal injury.
4
1/4 HP Furnace Electric Motor
For technical questions call 1-800-665-8685
V4.0
Publicité
