PC 1.1 Cable (Device to PC)
Required for connecting the 9-pin socket to a PC.
1
6
2
7
3
8
4
9
5
1
RxD 2
TxD 3
4
GND 5
6
RTS 7
CTS 8
9
Connection VC 10 lite/pro - PC
or
USB A
Micro B
Connection Refrigerated circulator
PC1.3 Cable (Device - Refrigerated circulator)
Connection cable
This cable is required to connect the VC 10 lite/pro to the VACSTAR (speed mode).
The device is maintenance-free. It is only subject to the natural
wear and tear of components and their statistical failure rate.
Cleaning
- For cleaning disconnect the mains plug!
- Use only cleaning agents which have been approved by to
clean devices.
These are water (with tenside) and isopropanol.
- Wear protective gloves during cleaning the devices.
- Electrical devices may not be placed in the cleansing agent for
the purpose of cleaning.
- Do not allow moisture to get into the device when cleaning.
- Before using another than the recommended method for
cleaning or decontamination, the user must ascertain with that
this method does not destroy the device.
9
8
7
6
1
2 RxD
3 TxD
PC
4
5 GND
6
7 RTS
8 CTS
9
9-pin RS 232
USB Micro B
Connection (Device - Refrigerated circulator)
Maintenance and cleaning
Spare parts order
When ordering spare parts, please give:
- device type.
- serial number, see type plate.
- position number and description of spare part,
see www.ika.com.
- software version
Repair
Please only send devices in for repair that have been clea-
ned and are free of materials which might present health
hazards.
For repair, please request the "Safety Declaration (Deconta-
mination Certificate)" from or use the download printout of it
from website at www.ika.com.
If your appliance requires repair, return it in its original packaging.
Storage packaging is not sufficient when sending the device - also
use appropriate transport packaging.
5
4
3
2
1
Fig. 10
Fig. 12
9-pin RS 232
Fig. 11
USB A
47