SilverCrest SDABC 1 A2 Instructions D'utilisation Et Consignes De Sécurité page 82

Risk of product damage
Only use the specified battery type!
Insert the batteries according to the polarity marking (+) and (–)
on the battery and the product.
Clean the contacts on the battery and inside the battery
compartment before inserting!
Immediately remove drained batteries from the product.
˜ Before use
˜ Unpacking
Remove all packaging materials (including foils). Check if all parts
are present.
NOTE: You can power the product using the included power
adaptor
[ ]
˜ Connecting the power adaptor to the mains
power supply
NOTE: Before connecting the power adaptor
power supply, compare the connection information on the type
plate of the power adaptor (voltage and frequency) with the
information for your electricity supply. Make sure the information
matches to prevent product damage.
Connect the coaxial power connector of the power adaptor
with the power adaptor port
Plug the power adaptor
to connect the product to the mains.
82 GB/IE
or using batteries.
5 ] [
into a properly installed mains socket
[ ]
[
.
to the mains
]
[ ]