DHC BT2400 Manuel De L'utilisateur page 18

DHC PC SOFTWARE
NOTE:
DHC PC Software can be found and installed at the following sources:
1. On the disc included in the box. (selected models only)
2. At our website, www.dhc.com.tw.
Navigation instruction: DHC website
CONNECTING THE TESTER TO YOUR PC
1. Launch DHC PC Software on your PC.
2. Connect the tester to PC with a USB cable.
VIEW TEST RESULT
1. Click on the View Test Result icon.
2. Select the type of test result you would like to review.
3. Test results will then be presented with function buttons on the top left and
search box on the top right.
DOWNLOAD TEST RESULT
1. Click on the Download Test Result icon.
2. Click START to initiate the download.
After the download is finished, a pop-up window will appear, click "Yes" if you
wish to clear all test result data on the tester, click "No" if otherwise.
DELETE TEST RESULT
1. Click on the Delete Test Result icon.
2. Click "Yes" if you wish to clear all test result data on the tester.
3. Click "No" if you wish to keep all existing test result data on the tester.
UPDATE FIRMWARE
1. Click on the Update Firmware icon.
2. Select the update file provided by DHC.
Support Download
18
18