Publicité
Les langues disponibles
Les langues disponibles
Problem
• Burner cap is dull or
1. Scratching
has changed color
2. Use of detergent or abrasive cleansers
• Unit has no power
1. House power turned off (power supply)
2. Tripped breaker
3. The power cord is not installed properly.
• Flames too big on
The installer missed part of the conversion.
converted cooktop
(Check 2 parts: regulator, cooktop valve).
(NP LP)
• Flame is too small or
1. Variable gas pressure
too large
2. Installer did not check
Cause
Small burner cap
Shine is lost
Shine is lost
Large burner cap
Shine is lost
Shine is lost
Pressure Regulator
cooktop valve
Center adjustment screw
LIMITED WARRANTY
Prevention
• Do not use steel wool or
abrasive cleansers to clean.
• To remove burnt-on food,
soak the burner heads in hot
water for 20–30 minutes. (Do
not use detergent)
• Check power at main board
before calling for service.
• Match power cord type and
outlet type
• Properly install the power
cord
• Check with installer first
• Refer to installation manual
• Check with installer first
41
Publicité
