Publicité
Les langues disponibles
Les langues disponibles
Smart Diagnosis™ Function
Should you experience any problems with the
appliance, it has the capability of transmitting
troubleshooting data to the LG ThinQ application on a
smartphone.
LG ThinQ Smart Diagnosis™
Use the Smart Diagnosis feature in the LG ThinQ
application for help diagnosing issues with the
appliance without the assistance of the SIGNATURE
KITCHEN SUITE Customer Information Center.
Follow the instructions in the LG ThinQ application to
perform a Smart Diagnosis using your smartphone.
1
Download the LG ThinQ application on your
smart phone.
2
Open the LG ThinQ application on your smart
phone. Touch the Smart Diagnosis™ button to
advance to the next screen.
3
Follow the directions in the application.
4
Touch [
] in the LG ThinQ application for a
more detailed guide on how to use the Wi-Fi
function.
NOTE
• Smart Diagnosis™ cannot be activated unless
the appliance can be turned on. If the appliance
cannot be turned on, troubleshooting must be
done without using Smart Diagnosis™.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL
and other open source licenses, that is contained in
this product, please visit https://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
SIGNATURE KITCHEN SUITE will also provide open
source code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as the
cost of media, shipping, and handling) upon email
request to opensource@lge.com. This offer is valid
for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of
this information.
RF Module Specifications
Type
Frequency Range Output Power (Max.)
Wi-Fi
2412 – 2462 MHz
Bluetooth 2402 – 2480 MHz
FCC Notice
The following notice covers the transmitter module
contained in this product.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference
and
2) This device must accept any interference received,
including interference that may cause undesired
operation.
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with
a minimum distance of 20 cm (7.8 inches) between
the antenna and your body. Users must follow the
specific operating instructions for satisfying RF
exposure compliance.
< 30 dBm
< 30 dBm
SMART FUNCTIONS
29
Publicité
