Bottle holder
When you open and close the door:
▯
The bottle holder prevents the bottles from
overturning.
Operating the appliance
1
S witching on the appliance
O p e r a t i n g t h e a p p l i a n c e
Press the # button.
1
The appliance begins to cool.
2
Set the required temperature.
"Setting the temperature" on page 29
~
Operating tips
▯
After the appliance has been switched on, it may
take several hours until the set temperature has
been reached. Do not put in any food until the
selected temperature has been reached.
▯
The sides of the housing are partly heated slightly.
This prevents condensation in the area of the door
seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Press the # button.
▯
The appliance no longer cools.
1
2
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
Press the # button.
1
The appliance no longer cools.
2
Pull out the mains plug or switch off the fuse.
3
Clean the appliance.
4
Leave the appliance open.
Setting the temperature
Recommended temperature
Refrigerator compartment:
Refrigerator compartment
▯
Keep pressing the button –/+ until the display
indicates the required temperature.
Cool-fresh compartment
The temperature in the cool-fresh compartment is kept
at around 0 °C.
Note: If frost forms on the food items in the cool-fresh
compartment, set a higher temperature. ~
what to do?" on page 36
Fast cooling
Fast cooling cools the refrigerator compartment as cold
as possible.
Switch on fast cooling e.g.:
▯
before placing large quantities of food in the
compartment
▯
for cooling drinks quickly
Note: When fast cooling is switched on, increased
operating noises may occur.
After 15 hours the appliance switches to normal
operation.
Switch fast cooling on/off:
Press Û button.
▯
The button lights up when fast cooling is switched
on.
Operating the appliance
+4 °C
"Faults –
en
29