Simons Voss Technologies SmartLocker AX LockNode Guide Abrégé page 46

3. Installation
together.
13
13. Place the reader at an angle (approx. 60°).
14
14. Turn the reader clockwise straight (bayonet mount).
15
15. Route the cable past next to the area of the light guide.
16. Insert the plug into the socket with the lug facing the cir-
cuit board using the special tool.
16
The reader beeps and flashes three times.
9
17. Attach the light guide and press it firmly.
17
Reader protected against twisting.
9
18. Store the excess cable in the gap next to the PCB.
19. Hook the lid on top.
18
20. Close the lid downwards.
19
21. Gently press the lid against the floor and unscrew the
lower screw anti-clockwise (0.9 mm hex wrench) until it
46 / 76 | EN