Simons Voss Technologies SmartLocker AX LockNode Guide Abrégé page 44

2. Intended use
sioning instructions. Pass these instructions and any main-
tenance instructions to the user.
2. Intended use
With LockNode integrated (LNI) installed, you can network
the SmartLocker AX and connect to WaveNet.
3. Installation
You will need the following tools:
0.9 mm hex wrench (included)

Electronics needle-nosed pliers

TX6 screwdriver

Grounding completed (e.g. on radiator).
ü
1. Insert the 0.9 mm hex key into the lower screw.
1
2. Gently press the reader cover against the floor and turn
the lower screw clockwise inwards until you can lift off
the cover.
1
3. Remove the cover.
3
44 / 76 | EN