Publicité
Les langues disponibles
Les langues disponibles
|
CAUTION
The pump motor is equipped with electronic protection from thermal overload protection; if overheated, the motor will shut off. If this happens,
you must turn off the pump switch to reset this safety feature, and turn the pump back on when it has cooled to continue use. The pump will not
restart until properly cooled.
CAUTION
This product is not suited for use with fluids intended for human consumption or fluids containing water. Materials of construction are not food
grade. Water will cause rust and corrosion in the pump housing. If water enters the pump, flush immediately with a petroleum product (gasoline,
diesel, light oil, etc) to eradicate residual water.
NOTICE
A Fill-Rite filter should be used on the pump outlet to ensure no foreign material is transferred to the fuel tank. Foreign material can damage
the equipment being fueled.
Fueling Safety
DANGER
Fumes accumulated while fueling create an Explosive Atmosphere. It is CRITICAL that all possible sources of ignition be removed to a safe
distance or extinguished. Sources of ignition would include (but not be limited to) open flames, cigarettes, static discharge, or electrical
connections that can create a spark. Explosion, fire, and severe injury or death will occur if the explosive vapors are ignited.
As a tank is being filled, air is displaced and exits via the fuel tank
vent creating fumes, which when accumulated create an Explosive
Atmosphere. To avoid possible explosion of accumulated vapors, it is
critical to keep possible sources of spark / ignition at safe distances
from the fuel vapors.
The accompanying diagram shows minimum safe distances for safe
fueling. 10' is the minimum safe distance between:
•
Power source and fuel supply
•
Power source and tank being filled
•
Power source and pump
Installation
Your Fill-Rite NX25-DDC pump is designed to be mobile for your convenience and safety. It can be installed / used in several configurations. Read each
configuration prior to beginning installation.
WARNING
The NX25-DDC smart pump is designed for use on skid tanks, and large bulk tanks to supply fuel. It is paramount to anchor the supply tank to
which the pump is mounted to ensure no movement occurs in transit or while fueling. Failure to secure the tank or drum can cause unexpected
and uncontrolled movement, resulting in damage, injury, death, and potential fire or explosion.
fillrite.com
NX25-DDC SERIES DC FUEL TRANSFER PUMPS
INSTALLATION AND OPERATION MANUAL
PUMP
SUCTION TUBE OR HOSE
PUMP INLET
SIDE TANK
10' MIN
If applicable.
POWER SUPPLY
.
DISCHARGE HOSE
PUMP OUTLET
SIDE TANK
10' MIN
10' MIN
4
Publicité
