Blackmagic Design Blackmagic 2110 IP Manuel D'installation Et D'utilisation page 18

Identification Settings
Use the identification settings to enter the name and language for your converter.
Entering a custom name is helpful to identify the right Blackmagic 2110 IP Converter 3x3G when
more than one is connected to your network. It also provides the name for network location.
You can also identify the current software version.
Date and Time
Set your date and time automatically by ticking the box. When setting the date and time
automatically, your converter will use the network time protocol server set in the NTP field. The
default NTP server is time.cloudflare.com, but you can also manually enter an alternate NTP
server and then click on 'set'.
If you are entering your date and time manually, use the fields to enter your date, time and time
zone. Setting the date and time correctly ensures your recordings have the same time and
date information as your network and also prevents conflicts that can occur with some network
storage systems.
Network Settings
Network Location
The network location is the name for your Blackmagic 2110 IP Converter 3x3G that will appear
in the registry. This is based on the identification name at the top of the setup utility. It's worth
noting that numeric prefixes will be ignored.
Blackmagic Converters Setup 18