Publicité
Les langues disponibles
Les langues disponibles
Element
Function
Page
20]
PLAY
Reproduces the
tape.
Is used in conjunction with the REC
[22]
key for
activating the record mode_
9
[21
J
STOP
Pressing of this key stops all tape transport functions and all sel ected
modes except dump edit mode.
9
[22]
REC
To be pressed together with PLAY [20] for enabling
the
record mode.
Recordings can only be made on chann els switched to READY
9
[23)
VU-meter for indicating the level of
channel
l (left) wi th three peak level
LEOs for
+
6.
+
9, and
+
12 dB.
6
l24_
READY
Readies channell (left) for recording. The
red
LED
above
the key
flas-
hes. During
a
recording. i.
e_
after REC
[2
2]
and PLAY [20J have been
pressed. this LED
is
continuously lit.
12
[25]
INPUT
Output
selector.
The input signal is indicated on the VU-meter [2
3]
and
can be
heard
via the
monitor
outputs.
11
[26)
SYNC
Output selector. The recording is reproduced via
the
record head
with
degraded frequency response. Permits record
ing of
channel
2
in
8yn-
chrorlsm wi
th
an existing record
ing
on channell
6
[27]
REPRO
Output
selector.
The recording is reproduced via the reproduce sou nd-
head. Thi
s
function can also be activated while a recording is in pro-
gress so that th
e
quality of a recording can be continually checked
(tape/source monitoring). The signal
from
the reproduce head is also
available on the VU-meter [23] and the monitor outputs.
10
[28]
INPUT
CH
l
Input level control for channe
l
l
.
I n the UNCAL
[30]
position it influences
the recording level of
channel
1.
11
[29J
MIC
Input selector. Activates
the
record mode via microphone (both chan-
nels), This function can only be selected if the tape recorder is equipped
with the optional MIC/LiNE SWI rCH BOARD.
11
(30]
UNCAL
Activates the
uncalib
rated
record
mode,
The record
level
can be adju
-
sted via the
INPUT CH
1
[28]
and
INPUT CH 2 [37) level potentiometers.
This mode is automatically activated by
the
input
selector
[29].
10
[31
]
LI
NE
Input selector. Activates the recording path via the LI
NE
INPUT CH 1 and
LINE INPUT CH 2.
Recording
with calibrated or uncalibrated (UNCA:_
(30]) level is possible in
this mode
.
10
[32J
VU-Meter
for
indicating the level of channel
2
(right) with three peak
level LEOs
i
or
+
6.
+
9. and
+
12 dB.
(33]
READY
Readies channel 2 (right) for
recording.
The red LED
above
the key
flashes, During a recording. i, e, after REC [22] and PLAY
[20]
have been
pressed
.
this LED
is
continuous
ly lit.
12
[34]
INPUT
Input
selector,
The
input signal is indicated on the VU-m eter [32]
and
can be heard via the monitor outputs.
11
(35)
SYNC
Output selector. ,he recording is reproduced via the record head With
degraded frequency response, Permits recording 01 cha nnel 1
in
sy
n-
chronism with an existing recording on channel 2.
6
/1(\
Publicité
