Sedus se:flair Mode D'emploi page 3

Function / Tips for users
A Height of the seat
Lowering the seat: 1. Sit down on the seat 2. Pull the
lever upwards (the seat will drop slowly) 3. Release
the lever at the desired height = lock in position
Raising the seat: 1. Stand up 2. Pull the lever upwards
(the seat will rise slowly) 3. Release the lever at
the desired height = lock in position
B Backrest tilt
Locking the backrest: remove the load on the backrest,
push the slider backwards = backrest is locked
Releasing the lock: remove the load on the backrest,
push the slider forward = backrest is dynamically
adjusted
Correct use
se:flair may only be used for the purpose intended
while exercising due care and attention.
Using it inappropriately (e.g. as a stepladder, sitting on
the edges of the seat shell or placing extreme weight
on one side) could result in accidents.
The maximum user weight is indicated on the product
label which is attached to the product.
B
Glides/Castors
A variety of glides/castors are available, for the sake
of your safety and for use on different types of flooring
in accordance with safety regulations:
– hard glides/castors for textile flooring (standard),
– soft glides/castors for all non-textile flooring,
– for 4-star aluminium base and wooden frame
felt glides for non-textile floors and plastic glides
for textile floors.
Changing glides/castors – this might be necessary,
for instance, after moving office, or after the installation
of a new floor covering:
1) 5-star-base swivel chair (on castors): Simply pull out
the castors and push new ones in.
2) 4-star aluminium base swivel chair (with felt glides/
plastic glides): Simply pull out the glides and push new
ones in.
3) Version with 4-star wooden frame: Carefully lever off
the glides using a flat tool. Clip on new glides by hand.
Cleaning the felt glides: To avoid damage to the floor
covering, it is recommended to clean the felt glides
regularly and remove coarse dirt particles (e.g. small
stones).
Plastic parts
Soapy water is suitable for cleaning. Please do not use
any aggressive cleaning materials.
Upholstery
Clean textiles on a regular basis. Minor stains can be
vacuumed or removed using compressed air or luke-
warm water and a damp cloth. Only use mild detergent
or the cleaning foam offered by Sedus.
Leather
Leather is a natural product. Colour shading gives the
material its unmistakable touch. Rub off light soiling
with a soft woollen cloth. Heavier soiling should only be
treated with cleaners designed for aniline dyed leather.
Do not expose semi-aniline leather to direct sunshine.
Seat height adjustment
A
We recommend cleaning the piston rod regularly with
a cloth. Other work on the gas spring, e.g. replacement,
may only be carried out by trained staff.
English