Bosch GBH 18V-36 C Professional Notice Originale page 12

12 | English
Connectivity functions
In conjunction with the Bluetooth® Low Energy Module
GCY 42, the following connectivity functions are available
for the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
Practical Advice
With the Bluetooth® Low Energy Module GCY 42, the
u
power tool is equipped with a radio interface. Local
operating restrictions, e.g. in aircraft or hospitals,
must be observed.
In areas in which the Bluetooth® wireless technology
u
must not be used, the Bluetooth® Low Energy Module
GCY 42 and the coin cell must be removed.
Note: The cover (11) can only be closed securely if the
Bluetooth® Low Energy Module GCY 42 and the coin cell are
in the power tool.
– To deactivate the Bluetooth® Low Energy Module
GCY 42, turn the coin cell over or place a means of insula-
tion between the coin cell and Bluetooth® Low Energy
Module GCY 42.
– Close the cover (11) to prevent dirt from getting in.
Overload clutch
If the application tool jams or snags, the power trans-
u
mission to the drill spindle will be interrupted. Always
hold the power tool firmly with both hands to with-
stand the forces this may create and adopt a position
with stable footing.
Switch the power tool off immediately and remove the
u
application tool if the power tool becomes blocked.
Switching on when the drilling tool is blocked may
cause high torque reactions.
Rapid shut-off (KickBack control)
The rapid shut-off function (KickBack Control)
gives the user greater control over the power
tool and offers them better protection than
power tools that do not have KickBack Control.
If the power tool suddenly and unforeseeably
rotates around the drilling axis, it will switch off, the rapid
shut-off indicator (17) will light up red and the worklight
(12) will flash. When rapid shut-off is activated, the status
indicator (20) flashes red.
– To switch the tool back on, release the on/off switch (9)
and then press it again.
Electronic Precision Control (EPC)
EPC assists you when drilling and when working with impact
in sensitive materials by ensuring slow start-up of the operat-
ing speed for precise working.
1 609 92A 9CN | (16.05.2024)
Adaptive Speed Control in "Chiselling" Operating Mode
For better control and precise positioning, the
power tool starts at a low speed and then in-
creases to the set speed.
Adapted Speed Control is started up automat-
ically when the power tool is switched on.
Vibration damping
The integrated vibration damping
function reduces the generated vibra-
tion.
Do not continue to use the power tool if the damping
u
element is damaged.
Maintenance and Service
Maintenance and Cleaning
Before carrying out any work on the power tool (e.g.
u
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
Replace a damaged dust protection cap immediately.
u
It is recommended that you have use an after-sales
service for this.
– Clean the tool holder (2) after each use.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
Bosch Power Tools