Bosch GBH 18V-36 C Professional Notice Originale page 11

Power tool status Meaning/cause
indicator (20)
Red Power tool has overheated or rechargeable
battery is empty
Red Lock-on button pressed in "hammer drilling"
operating mode
Combi-switch activated during operation
Motor is jammed, battery too weak
General error
Flashing red Rapid shut-off is triggered
– In combination with the
rapid shut-off
indicator (17)
Flashing blue Power tool is establishing a connection to a
mobile device or settings are being trans-
ferred
Smartphone symbol (21) Meaning/cause
– Further information can be found on a mobile device if it is connected via Bluetooth® wireless
technology.
Selecting the working mode
Working mode (18) indic- Functions
ator
Auto working mode: Fast, controlled run-up up to maximum power
lights up
– "Hammer drilling" operating mode (Electronic Precision Control soft start): Fast, con-
– Rapid Shut-off (KickBack Control) active
– "Chiselling" operating mode (Adaptive Speed Control soft start): Fast, controlled run-up up
Soft working mode: Reduced power for processing sensitive materials
lights up
– "Hammer drilling" operating mode (Electronic Precision Control soft start): Slow, strictly
– Rapid shut-off (KickBack Control) with an even more sensitive setup
– "Chiselling" operating mode (Adaptive Speed Control soft start): Slow, strictly controlled
Favourite working mode: Individual configuration via smartphone app
lights up
The following settings are pre-programmed:
– "Hammer drilling" operating mode (Electronic Precision Control soft start): Fastest pos-
– Rapid Shut-off (KickBack Control) active
– "Chiselling" operating mode (Adaptive Speed Control soft start): Deactivated, fastest pos-
Bosch Power Tools
trolled run-up up to maximum power
to maximum power
controlled run-up up to reduced, low power
run-up up to reduced power
sible run-up up to maximum power
sible run-up up to maximum power
Solution
Allow the power tool to cool down, or replace
or charge the battery
Press the lock-on button again
Turn the power tool off and on again
Charge the battery or use the recommended
battery type
– Turn the power tool off and on again, or re-
move the battery and reinsert it
If the error persists:
– Send the power tool to the after-sales ser-
vice
Turn the power tool off and on again
–
1 609 92A 9CN | (16.05.2024)
English | 11