upwards to lock it in place (fig_c). To reopen the
tray, swing it downwards then pull the central lever
towards you and put the tray in one of the positions
for use.
COMPACT CLOSURE: before closing the high chair,
17
it is necessary to fold up the tray. Put the backrest
in the vertical position, then pull the two red
levers on the sides of the seat outwards (Arrow_a).
Rotate it downwards (Arrow_b), lower the seat to
the bottom position and fold away the footrest. To
raise the support bases, press the red levers on the
sides of the uprights (Arrow_c) and at the same
time lift the grey levers (Arrow_d). The bases will
lift up automatically (Arrow_e). The high chair is
freestanding when folded up.
18 REMOVABLE COVERS: To remove the seat covers,
remove the upper part of the sack, then pull the
harness straps out through the backrest (fig. a) and
through the sack (fig. b). Push a screwdriver into the
hole in the leg divider and pull out the belt (fig. c).
19 Unbutton the sack at the sides (fig. d) and pull up to
remove it (fig. e).
ACCESSORIES
20 TATAMIA & PRIMA PAPPA NEWBORN KIT: a Soft
Touch cover and a play bar with sound effects.
SERIAL NUMBERS
21 Information about the production date of TATAMIA
can be found under the base.
_ Product name, date of manufacture and serial
number.
This information is required for any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place. The maintenance have to be
regularly.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and
free of dust and sand and, if necessary, lubricate
with light machine oil all metallic moving parts.
Check all nuts and bolts for tightness and tighten
when required. check all coverings for bolts and
sharp edges and replace when required. check swing
seat and attachments for evidence of deterioration.
Replace when required in accordance with the
manufacturer's instructions.
CLEANING THE SACK: Wash with a damp cloth and
neutral detergent. Do not wring. Do not use chlorine
bleach. Do not iron. Do not dry clean. Do not use
solvents for stain removal. Do not spin dry.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it
website www.pegperego.com
- 14 -
fax 0039/039/33.09.992