Télécharger Imprimer la page

LEMI KE-TREAT Notice D'utilisation page 10

Publicité

Les langues disponibles

Les langues disponibles

8. USE OF THE CHAIR
200 kg (max. patient weight)
ATTENTION! Only one person can get up on the chair; the person must go up/down when the chair
is in the basic position going up on the seat.
WARNING! Get on the chair always by sitting properly in the central part of
the seat. Do not sit or lean on the side of the feet or of the head.
WARNING! The limbs of the patient must always be on the chair.
The operator must always inform the patient when he moves the chair.
WARNING! Be careful to make sure that the chair or its electrical parts are not wet and that liquids
become not stagnant on the chair itself; immediately wipe up any liquids – including physiological
liquids of the patient – which may end up on the chair.
WARNING! If a patient is let alone for a short time, it is necessary to place the chair in the lowest
position with respect to the walking floor, in order to reduce risk of damage in case of fall
To avoid shock hazard, do not connect or disconnect the power plug with wet hands.
Do not use the chair barefoot.
9. MAINTENANCE
The chair has been designed and constructed so as to reduce as much as possible the necessary maintenance and en-
sure proper functioning over the years without any problems. During any intervention on the chair, it is recommended
to follow the instructions given in this section.
WARNING! All interventions on the chair must be carried out by competent and trained personnel
on the methods to operate correctly and safety. Do not make any action on the chair moving, and
always check that the plug connecting to power supply is disconnected; bring the power plug next
to you during the execution of the intervention on the chair so you can check at any time the actual
separation.
9.1. General Checks
Constantly check the general condition of the chair: the integrity of the protections, the electrical equipment and the
condition of the pads.
WARNING! Do not use the chair if any component is found to be not perfectly intact or in service. In
this case, put the chair out of service by disconnecting the power plug immediately and contact an
Authorized Service Centre.
WARNING! Do not modify this chair without authorization of the manufacturer. If this chair is modi-
fied, appropriate inspection and testing must be conducted to ensure its continued safe use.
10
2500 N (safety load)

Publicité

loading

Ce manuel est également adapté pour:

He-move