CONTINENTAL EDISON CECTG4GFVB Guide D'utilisation page 66

VII. TROUBLESHOOTING GUIDE
■ This appliance should only be repaired by a qualified service person. Incorrect repairs can
result in considerable risk to the user.
■ However, some minor issues can be resolved as below:
Problem
Burners do not
light
Ignition is not
satisfactory
There is noise
when a burner
is lit
The flame
goes out when
using
Possible Cause
No spark
The burner lid is not correctly
assembled.
The gas supply is not activated.
The gas supply is not open.
The burner lid is not correctly
assembled.
The ignition socket is contaminated
by substances.
The burners are wet
The holes in the flame diffuser are
clogged
The burner lid is not correctly
assembled.
The safety device is contaminated
by substances.
Cooking foods boiled and
overflowed and extinguished the
flame.
A strong draft blew on the flame and
extinguished it.
Check the power supply
Assemble the lid correctly
Open the gas supply completely.
Open the gas supply completely.
Assemble the lid correctly
Remove the substances with a dry
cloth.
Dry the burner lids thoroughly
Clean the flame diffuser.
Assemble the cover correctly.
Clean the safety device.
Turn off the burner. Wait a minute
before relighting the burner.
Please turn off the burner and check
the cooking zone to stop the draft, like
an open window. Wait a minute before
relighting the burner.
65
Solution