Publicité
Les langues disponibles
Les langues disponibles
■
Replace the auxiliary burners, semi-rapid, fast and triple crown as below:
a. Place the flame diffuser (4) on the burner cup (5) so that the igniter and the safety
device pass through their respective holes in the flame diffuser. The flame spreader
must snap into place correctly.
b. Position the burner cover (1, 2, 3) on the flame diffuser (4) so that the retaining
rods fit into the respective holes.
Replace the parts correctly in order after cleaning.
-
Do not mix the top and bottom parts.
-
The retaining rods must fit exactly into the grooves.
64
Publicité
